Learn / Guided case
Guided case · 15 minutes
One bushing, two operations.
Four steps to reason like on the shop floor: what the drawing asks for, what you do in the first operation, how you re-clamp the part, what you inspect.
first clamping second clamping reachable face
01 · Read the required result
The bushing in the diagram has a through bore, an outside diameter and two faces, called A and B. Before choosing operations you need dimensions, tolerances, material and surface requirements.
The drawing is deliberately schematic: it lacks the data a real plan would need.
What information is missing to judge whether the bore is good?
02 · Reason about the first operation
Assume a pre-cut blank and a first clamping near face A. In this operation you machine face B, the reachable outside diameter and the bore.
We haven’t chosen jaws, pressures or tools: they need the real part and machine data.
Which face is left for the second operation?
03 · Define the re-clamping
The sub-spindle takes the part from side B. You must decide where it clamps, which face goes against the stop and how to protect finished surfaces. After the transfer, face A becomes reachable.
The diagram describes the part’s states. The real clamping, synchronisation and release sequence depends on the machine.
What links the re-clamping to the geometric result?
04 · Plan the inspection
The plan states which features to measure and when they can be reached: bore diameter, outside diameter, length. Any geometric tolerances and roughness are extra checks.
First decide what you need to prove, then choose the instrument. A shiny surface is not a measurement.
When do you put inspection into the plan?
Case completed: you reasoned through all four steps.